Raw Materials
Foundry Chemicals & Consumables
Casting quality depends not only on metal composition but also on mould, core, feeding and slag management. We supply slag coagulants, ceramic foam filters, feeder sleeves, mould and core coatings, furan resin with hardener, and bentonite.
Products in this group
Slag Coagulant
Powder that turns slag on the molten metal surface into a dry mass that is easy to remove.
View →Ceramic Foam Filters
Ceramic filters in the gating system that retain slag and inclusions and calm metal flow.
View →Feeder Sleeves (Exothermic / Insulating)
Exothermic and insulating sleeves that reduce feeder volume needed to compensate shrinkage.
View →Mould & Core Coatings
Refractory coatings that protect mould and core surfaces from heat and improve surface finish.
View →Furan Resin & Hardener
Furan resin and acid hardener used for cold-set sand mould and core production.
View →Bentonite
Sodium and calcium bentonite used as the binder in green sand moulding.
View →